Cost efficient SD / HD IRD Solution for Broadcast Applications

 

From early April Divibroad will deliver the new DVB-compliant receiver / decoder series ReDe 2000 and ReDe-7000.


The ReDe-2000 is a DVB-S / S2 Receiver with SD / HD 1080p decoder. It has a parallel HD-SDI / HDMI output and Fbas. Signals can be converted from HD to SD or SD to HD. In addition, an ASI input.

The ReDe-7000 has held the DVB-S / S2 receiver unit via an IP with FEC input SMPTE 2022nd.

The main features of the Divibroad IRD`s are:

  • Low cost (ReDe 2000 from € 1,999 / ReDe-7000 from € 2,499)
  • Start time under 10 sec. / Power consumption of less than 20 watts / fanless operation
  • Robust hardware architecture on FPGA chip and base for 24/7 operation
  • "Easy-of-use" menu navigation and operation via front panel or WEB GUI
  • 1x RF input: Frequency Range: 950-2150 MHz (L-band) RF input level: -65 dBm to -25 dBm, DiSEqC 1.1 / Automatic DVB-S or DVB-S2 selection / DVB-S (EN 300421) Constellation QPSK symbol rate up to 45 Mbps / DVB-S2 (EN 302307) Constellation QPSK, 8PSK, 16APSK, 32APSK symbol rate up to 45 Mbps / roll-off: 0.35, 0.25 00:20 /
  • 1x 1000 / BaseT Ethernet for MPEG2-TS / MPTS transport stream / FEC Error Corrections SMPTE 2022
  • 1x ASI input F-type, 75 BNC 75 ohm / Packet Length Input: 188 or 204
  • Descrambling BISS 1 / E
  • Video Decoding H.264 Main / High Profile Level 4.1 (1 to 62.5 Mbit) MPEG2 MP @ HL (1 to 80Mbit) / VC-1 SP @ ML / MP @ HL / AP @ L3 / AVS Jizhun Profile Level 6.0.
  • Output resolution / up / down conversation: 1080p @ 50/60, 1080i @ 50/60, 720p @ 50/60 / 576p @ 50/60, 576i @ 50/60, PAL / NTSC / SECAM
  • Audio Decoding MPEG-1 Layer 2 2 mono channels (Q3 -2015: 6 mono channels and AC3)
  • Output interfaces: CVBS / 2x analog audio L + R / HDMI A / SD / HD SDI (simultaneous output CVBS + HDMI + SDI)
  • Connectors analog: Audio: 2x SMB male unbalance / Video: 1x SMB female
  • Connectors Digital: HDMI: Type A / SDI 1x BNC